High Impact Plastic Portable Registers - N0. 1 and N0. 2 Sizes
Made of high impact plastic, these portable registers are easy to operate. Pen or pencil inserted in the pin hole advances form for easy removal. The next form is then in position for recording the next transaction. File copies are held by a spring tab in the bottom compartment.
Exact form size must be provided with your order.
Part Number Description Master Pack
EZ1SC Size #1 for sheet carbon 40
EZ1CL Size #1 for carbonless 40
EZ2SC Size #2 for sheet carbon 24
EZ2CL Size #2 for carbonless 24
Designed for conventional 2-hole punched forms. Holes must be 3/8” dia., spaced 3/8" from top of form and 2-3/4" center to center.
Register holds 75 sets of 3-part forms.
Size No. 1 sheet carbon is 4-5/16" wide up to 8" length.
Size No. 2 sheet carbon is 5-1/2" wide up to 9" length.
Size No. 1 carbonless form is 4" wide up to 6-1/4" length.
Size No. 2 carbonless form is 5-1/2" wide up to 8-1/2" length.
Each register is packed in an individual carton.
Steel Portable Registers - No. 60 Series
A knob on the side of these registers ejects a portion of the form for easy removal. This action automatically slides open a storage tray for the copies to be filed and the continuous form advances manually until the next form locks into position on the punch hole pins. The used forms are then torn off at the perforation line. The automatic storage tray function can be disarmed if not desired.
Exact form size, and sample forms (for testing purposes) must be provided with your order.
Part Number Description Master Pack
60#1 Carbon, form size 4-5/16"W x 8"L 10
60#1 Scarbon, form size 4"W x 6-1/2"L 10
60#1 CLcarbonless, form size 4-5/16"W x 6-1/2"L 10
60#1 ASCLcarbonl.ess, form size 4"W x 6-1/2"L 10
60#1 BSCLcarbonless, form size 4-5/16"W x 7"L 10
60#1 CSCLcarbonless, form size 4-5/16"W x 7"L 10
60#2 carbon, form size 5-1/2"W x 8-1/2"L 10
60#1 2CLcarbonless, form size 5-1/2"W x 8-1/2"L 10
Standard hole size is 3/8" dia.
Distance between holes is always 2-3/4" from center to center.
Standard tear-off dimension is 3/8" from top of holes to top of form. Additional tear-off dimension is 3/8" from top of holes to top of form.
Standard carbon roll is 5-1/2" long for No. 1 size and 7-1/2" long for No. 2 size. Carbon roll diameter is 1" maximum.
Case cover overlaps edge of form by 5/32" on each edge; allow for this in printing design or form.
Design standard form for no writing on top 1-1/8" of form which is covered by lid.
Register holds 100 sets of 3-part forms.
Each register is packed in an individual carton.